EFFECT OF CRYOGENIC TEMPERING ON STEEL

  • S. Balasubramani Sri Eshwar College of Engineering, Coimbatore.
  • S. Venkatesh Sri Eshwar College of Engineering, Coimbatore.
  • T. Ramakrishnan Sri Eshwar College of Engineering, Coimbatore.
  • S.Karthik Raja Sri Eshwar College of Engineering, Coimbatore.
  • P.Shanmuga Sundaram
DOI: https://doi.org/10.53555/mce.v1i6.992
Keywords: Cryogenic, Tempering, Steel, properties, micro structure analysis

Abstract

In the field of mechanical engineering we are always looking to improve themechanical properties of the material. By doing so we can improve the quality of the product weare making. In order to improve the properties of the material, heat treatment process is used such that mechanical properties such as strength, hardness, wear resistance, etc. is improved. Butat the end of heat treatment we get material more brittle and difficult to use in practical.Tempering process is used to increase the ductility of material. Even though there will be someinternal stresses in the material, In order to remove these internal stresses and to improve the
wear resistance of the material, new treatment called CRYOGENIC TEMPERING is used. Inthis project we have discussed about the effect of cryogenic tempering on steel.

Downloads

Download data is not yet available.

Author Biographies

S. Balasubramani, Sri Eshwar College of Engineering, Coimbatore.

Assistant professor

Department of Mechanical Engineering

S. Venkatesh, Sri Eshwar College of Engineering, Coimbatore.

Assistant Professor,

Department of Mechanical Engineering

T. Ramakrishnan, Sri Eshwar College of Engineering, Coimbatore.

Assistant Professor

Department of Mechanical Engineering

S.Karthik Raja, Sri Eshwar College of Engineering, Coimbatore.

UG Scholar

Department of Mechanical Engineering,

P.Shanmuga Sundaram

Engineer Draftsman Automation Pvt Ltd, Coimbatore

Published
2015-06-30
How to Cite
Balasubramani, S., Venkatesh, S., Ramakrishnan, T., Raja, S., & Sundaram, P. (2015). EFFECT OF CRYOGENIC TEMPERING ON STEEL. IJRDO - Journal of Mechanical And Civil Engineering, 1(6), 98-113. https://doi.org/10.53555/mce.v1i6.992
Issue
Vol. 1 No. 6 (2015): IJRDO - Journal of Mechanical and Civil Engineering
Section
Articles

Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.